Inner Ring Insulation: Helps reduce bearing current passage and electrical erosion in motors and generators requiring shaft-side insulation.
Service Response: All inquiries are answered within 24 hours.
Brass Cage & C3 Clearance: A machined brass cage with greater-than-Normal radial clearance for assemblies specified with this configuration.
Plasma Spray Technology: Creates a coating with excellent wear and heat resistance.
TFL offers an own-brand replacement option for NU 330 ECM/C3VL2071 enquiries, combining 150 × 320 × 65 mm dimensions, inner ring insulation, a machined brass cage and C3 clearance.
Your existing bearing designation or drawing provides the basis for comparing the replacement configuration. TFL can quote the required quantity and coordinate insulation specifications and inspection documents before ordering.
| SKF | NKE | NTN |
|---|---|---|
| NU 330 ECM/C3VL2071 | NU330-E-M6-C3-SQ77 | 7MC3-NU330 |
For a motor repair or spare-parts order, matching the NU 330 dimensions is only part of the requirement. Inner ring insulation, C3 clearance and the brass cage also matter to the replacement specification.
TFL bases the quotation on this complete configuration and your purchasing requirements. Distributors and maintenance buyers can combine NU 330 ECM/C3VL2071 with other bearing models in one enquiry, with pricing, availability, packaging and documentation confirmed for the order.
Inner Ring Insulation – Ceramic coating on the inner ring helps reduce bearing current passage and electrical erosion.
NU Roller Design – Supports radial loads while allowing axial displacement in both directions to accommodate shaft expansion.
Brass Cage & C3 Clearance – A machined brass cage guides the rollers, while C3 clearance allows for clearance reduction from fits and temperature differences.
NU 330 ECM/C3VL2071 is an option for motor and generator bearing positions combining a 150 mm shaft seat, substantial radial loading and inner ring insulation. Its NU design is suited to the non-locating position rather than the position carrying axial thrust.
In large pump drive motors, rotor heating causes shaft expansion, while inverter operation can expose bearings to damaging electrical currents. At a matching NU 330 non-locating position, the NU 330 ECM/C3VL2071 supports radial loads and allows axial movement within the bearing. Its inner ring insulation helps reduce current passage through the rolling contacts.
Industrial motors running under sustained radial loads need bearing support that also accommodates changes in operating temperature. The NU 330 ECM/C3VL2071 combines cylindrical rollers for radial load capacity with C3 clearance to allow for clearance reduction from tight fits and ring temperature differences. Inner ring insulation helps reduce electrical pitting that can lead to bearing noise and premature replacement.
Generator rotors expand as they warm up, and shaft voltages can drive unwanted current through the bearings. In a suitable non-locating position, the NU 330 ECM/C3VL2071 allows axial rotor movement while maintaining radial support. The insulated inner ring adds an electrical barrier between the shaft and bearing, helping reduce current-related raceway damage.
*The brands and series mentioned are provided for industry illustration only. Final bearing selection should be confirmed through verification of dimensions, clearance class, insulation type, and operating conditions. For selection assistance or technical consultation, please contact the TFL engineering team for support.
Discover more related products for your needs. Check out our hot-selling bearing models that serve as trusted alternatives to major brands like SKF and FAG—offering the same performance with greater value.
"*" indicates required fields
"*" indicates required fields