Alumina Coating: Breakdown voltage up to 3000V and resistance up to 200 MΩ.
Standard Dimensions: Built to international standards for direct replacement of same-model bearings.
Application Matching: We help match insulation type, clearance, tolerance, and replacement requirements.
Ample Stock: A stable supply chain and sufficient inventory enable us to fulfill most orders.
TFL 6334M/C3VL0241 has an interchange basis with corresponding SKF and FAG models through its 170 × 360 × 72 mm boundary dimensions, C3 clearance, and outer-ring insulation structure. It can be reviewed through an INSOCOAT equivalent chart or SKF/FAG interchange list. VL0241 and J20AA generally indicate outer-ring insulated types, so buyers should not judge replacement only from the base designation 6334M. TFL can review dimensions, clearance, cage type, and insulation location from the original bearing photo, complete model number, equipment type, and mounting position. Final direct replacement should be verified against fit arrangement, speed, load, temperature rise, lubrication method, and original machine requirements.
| SKF | FAG |
|---|---|
| 6334M/C3VL0241 | 6334-M-J20AA-C3 |
TFL supports industrial buyers, motor repair teams, and distributors with insulated bearing model consolidation, interchange confirmation, and pre-shipment checking. For large outer-ring insulated bearings such as 6334M/C3VL0241, we focus on the 170 × 360 × 72 mm dimensions, C3 clearance, VL0241 insulation location, brass cage, and original brand suffix to reduce selection errors in replacement purchasing. TFL supports No MOQ, small maintenance orders, volume purchasing, OEM/ODM, and consolidated shipment of multiple bearing models for large motor repair, wind service, project sourcing, and alternative-brand supply. The listed ROHS and REACH status is Compliant; specific document requirements can be confirmed at the RFQ or order stage.
C3 radial internal clearance — suitable for large motor positions specified with C3 clearance.
Outer-ring insulation VL0241 — ceramic-coated outer ring for electrical current isolation.
Brass cage — suitable for large industrial motor, generator, and heavy-duty drive applications.
TFL 6334M/C3VL0241 electrically insulated deep groove ball bearing is suitable for large inverter motors, industrial motors, wind turbine generators, industrial pump motors, compressor motors, and heavy-duty drive systems. Its VL0241 outer-ring insulation helps interrupt current paths between the housing and bearing outer ring, reducing electrical erosion and fluting risk under inverter-driven or generator operation. The 325 kN dynamic load rating, 365 kN static load rating, C3 clearance, and brass cage fit continuous-duty and higher-load conditions in large motor bearing positions. Final application should be checked against the original bearing suffix, insulation location, fits, temperature rise, load, and speed.
TFL electrically insulated deep groove ball bearings, such as 6334M/C3VL0241 and 6334M/C4VL0241, can be considered for large inverter motor equipment types, including Siemens 1LE0001 and ABB M3BP series. In these motors, inverter-driven operation may generate shaft currents and cause electrical erosion or fluting on bearing raceways. The VL0241 outer-ring alumina ceramic insulation of 6334M/C3VL0241 provides 1000–3000 V DC dielectric protection, making it a replacement candidate for SKF INSOCOAT VL0241 and FAG J20AA types where outer-ring insulation and C3 clearance are specified. This is an application-type reference, not an installed case.
TFL electrically insulated bearings, such as 6334M/C3VL0241, can be considered for generator bearing positions in wind turbine generators exposed to shaft current, electrical erosion, or high-humidity operating conditions, including equipment types such as Vestas V90, Goldwind GW121/2500, and Siemens Gamesa 2.3 MW turbines. Wind turbine generators operate under variable speed, vibration, humidity, and fluctuating load conditions, so insulation location, clearance class, and cage structure should be checked carefully. With VL0241 outer-ring insulation, C3 clearance, and a brass cage, 6334M/C3VL0241 is a candidate for wind turbine generator bearing replacement review. This is an application-type reference, not an installed case.
TFL electrically insulated bearings, such as 6334M/C3VL0241, can be considered for bearing positions in rail traction motors exposed to shaft current, electrical erosion, or inverter-drive effects. Traction motors usually operate under high load, frequent start-stop conditions, vibration, and variable speed, so bearing selection should verify dimensions, clearance, insulation location, cage structure, and original equipment requirements. With VL0241 outer-ring insulation, C3 clearance, and a brass cage, 6334M/C3VL0241 is a candidate for traction motor bearing replacement review. This is an application-type reference, not an installed case.
*The brands and series mentioned are provided for industry illustration only. Final bearing selection should be confirmed through verification of dimensions, clearance class, insulation type, and operating conditions. For selection assistance or technical consultation, please contact the TFL engineering team for support.
Discover more related products for your needs. Check out our hot-selling bearing models that serve as trusted alternatives to major brands like SKF and FAG—offering the same performance with greater value.
"*" indicates required fields
"*" indicates required fields
